DES-5221 Specialist – Implementation Engineer, Data Center Networking Version 1.0 Exam

Certification Requirements
To complete the requirements for this certification you must:

1. Achieve one of the following credentials
• Associate – Networking Version 1.0
• Dell Certified Associate – Networking (Valid if already earned, but not achievable anymore)
• Dell Certified Professional – Networking (Valid if already earned, but not achievable anymore)

2. Pass the following Implementation Exam
• DES-5221 Specialist – Implementation Engineer, Data Center Networking Exam

Note: These details reflect certification requirements as of November 15, 2019.
Other Certification Recommendations

Once you have achieved this Certification you may be interested in:
• Specialist – Implementation Engineer, Campus Networking
The Proven Professional Program periodically updates certification requirements. *Please check the Proven Professional CertTracker website regularly for the latest information and for other options to meet the Associate level requirement.

Overview
This exam is a qualifying exam for the Specialist – Implementation Engineer, Data Center Networking track.
This exam focuses on concepts related to the Data Center environment and Dell EMC Networking’s S-Series and Z-Series products. Focus is on Dell EMC Networking SmartFabric OS10-based protocols and features.
Dell Technologies provides free practice tests to assess your knowledge in preparation for the exam. Practice tests allow you to become familiar with the topics and question types you will find on the proctored exam. Your results on a practice test offer one indication of how prepared you are for the proctored exam and can highlight topics on which you need to study and train further. A passing score on the practice test does not guarantee a passing score on the certification exam.

Products
Products likely to be referred to on this exam include but are not limited to:
• Dell EMC Networking S-Series Switches
• Dell EMC Networking Z-Series Switches

Exam Topics
Topics likely to be covered on this exam include:

Networks – The Basics (19.6%)
• Identify common data center topologies, protocols, and topologies; describe the Dell EMC data center switch portfolio
• Basic switch configuration: Identify the normal boot process of a S and Z-Series switch running OS 10. List the first-time switch setup requirements. Perform the steps for upgrading switch firmware in OS 10.
• Access Control Lists: Explain the purpose of access control; apply appropriate commands to deny or permit IP connectivity; complete the required configuration to permit host access control; determine why particular computers are being blocked from accessing a server
• AAA Security: Explain the purpose of AAA security; describe AAA process, core components and their function; configure local and RADIUS authentication
• Dynamic Host Configuration Protocol: DHCP’s basic operation; Explain the role of the DHCP Relay; configure DHCP in OS10; identify the options to secure DHCP from attacks

Layer-2 Technologies and Protocols (20.1%)
• Virtual Lans – Identify the characteristics of a VLAN; explain the differences between tagged and untagged frames; configure VLAN trunking; configure VLAN Port membership; verify trunking and Port Membership; troubleshoot VLANs
• Spanning-tree Protocol – Identify the operations and use cases for STP; Configure and validate RSTP/MSTP/RSTP-PV; Manipulate spanning tree root bridge and port cost configurations
• Link Aggregation Groups – Identify the operations and use cases for LAGs; configure, verify, and trouble shoot static LAGs; configure, verify, and troubleshoot dynamic LAGs
• Discovery Protocols – Describe the characteristics of discovery protocols; describe uses cases for using discovery protocols; explain how to configure and validate. Configure discovery protocols; interpret LLDP outputs

Discovery Protocols – Describe the characteristics of discovery protocols; describe uses cases for using discovery protocols; explain how to configure and validate. Configure discovery protocols; interpret LLDP outputs (30.7%)
• Basic Routing – Configure IPv4 on an interface; identify when to utilize a gateway as a last resort; configure and modify static routes; test inter-VLAN routing
• Open Shortest Path First – describe OSPF operation, and core components; configure and validate OSPF using; interpret OSPF show commands; describe the operations and use cases for ECMP; test inter-VLAN routing
• Border Gateway Protocol – Explain operations of BGP;
• identify design best practices when configuring BGP in a leaf/spine environment; configure and validate BGP; Describe the operations and use cases for ECMP; configure and validate ECMP
• Policy-Based Routing – Describe the basic operation of PBR; identify PBR use cases; configure and validate PBR

Data Center Technologies and Protocols (29.6%)
• Virtual Link Trunking – Describe the components that makeup a VLT configuration; Configure and validate VLTs; troubleshoot basic VLT configuration issues
• Virtual Router Redundancy Protocol – describe the basic operation of VRRP; identify the components of VRRP; describe VRRP Priorities; compare Pre-empt and no Pre-empt; configure VRRP on switches configured for VLT
• Uplink Failure Detection – describe the components and operation of UFD; identify the differences between Active/Active and Active/Standby; configure and verify UFD
• Virtual Routing and Forwarding – describe the operations and use cases for (VRF); configure and validate VRF
• Quality of Service – Describe the basic operation of QoS; Describe how QoS identifies and marks traffic; identify the characteristics of QoS; identify QoS protocols and their uses; configure QoS
• Multicast – Explain in depth the concepts relating to IP Multicast technology; compare IGMP and PIM use cases; identify the steps required to configure multicasting into an existing multicast environment

The percentages after each topic above reflects the approximate distribution of the total question set across the exam.

QUESTION 1
Which type of protocol is OSPF and what metric does it use to determine best path?

A. Link-state protocol that uses a concept of cost as metric
B. Hybrid protocol that uses hop count as a metric
C. Path vector protocol that uses the Dijkstra algorithm as a metric
D. Distance Vector protocol that uses bandwidth and delay as metric

Correct Answer: A

QUESTION 2
What is the function of the authentication service?

A. Validates the user identity
B. Determines switch management commands
C. Validates switch order
D. Determines which services the user is enabled to access

Correct Answer: A

QUESTION 3
A customer reports they can no longer access their services and a network administrator has been assigned to investigate. A UFD disabled error status appears on all ports. What caused the issue?

A. Spanning tree Loop-guard was implemented on the uplink-state group.
B. One of the upstream interfaces is an uplink-state group went down.
C. There was no issue; this is normal behavior.
D. Both a port channel and its members were assigned to an uplink-state group.

Correct Answer: A

Actualkey Dell EMC DCS-IE DES-5221 exam pdf, Certkingdom Dell EMC DCS-IE DES-5221 PDF

MCTS Training, MCITP Trainnig

Best Dell EMC DCS-IE ES-5221 Certification, Dell EMC DCS-IE DES-5221 Training at certkingdom.com

Click to rate this post!
[Total: 0 Average: 0]

Author: admin

Hi I educated in the U.K. with working experienced for 18 years in multinational companies, As an IT Manager and IT Instructor, I am attached with certkingdom.com here they provide IT exams study material, the study materials included exams Q&A with Explanation, Study Guides, Training Labs, Exams Simulations, Training Videos, etc. for certification like MCSE 2003 Training, MCITP Training, http://www.certkingdom.com, CCNA exams preparation, CompTIA A+ Training, and more Certkingdom.com provide you the best training 100% guarantee. “Best Material Great Results”